Knowledge Base & FAQ
I forgot my password
Don't have an account yet?
Join Us Now!
DAVID Systems - Customer Service Portal Forum Index
How to configure IO Card in DigaSystem?
View previous topic
View next topic
Posted: Sun, 25. Dec 05, 00:54
Post subject: How to configure IO Card in DigaSystem?
Question: How can I configure the support for IO cards in DigaSystem ?
The following applications support IO-cards:
- RecorderOCX (for DBM, NewsScheduler, NewsSchedulerX, CartWallManager)
Here is a guide to installation and configuration.
1. WHICH FILES ARE NEEDED ?
- PCLComSrv.exe (PCL COM Server)
- PclDrv.dll (PCL API for the DigaSystem applications)
- Specific IO card DLL (see below)
These DLLs are needed for the different IO cards:
PclAdv725.dll (DLL for Advantech PCL-725 ISA card - 8 Bit)
PclAdv1760.dll (DLL for Advantech PCI-1760 PCI card - 8 Bit)
PclPiso725.dll (DLL for ICP DAS PISO-725 PCI card - 8 Bit)
PclIcpP8R8.dll (DLL for ICP DAS P8R8 (PCI-725) PCI card - 8 Bit)
PclIcpP16R16.dll (DLL for ICP DAS P16R16 PCI card - 16 Bit)
PclDvd725.dll (DLL for ISA cards similar to Advantech PCL-725 with DAVID device driver - 8 Bit)
PclSimulation.dll (DLL that implements an IO card simulation for testing without physical IO card)
Copy all DLLs and PclComServer.exe to \Winnt\System32
Setup your configuration (see below)
Click OK to save your settings and register the server
3. CONFIGURATION OF PCLCOMSERVER
Number of cards in the system:
How many IO cards are in the PC?, multiple cards must be identical models.
Type of card:
Choose the type of board(s) you have installed.
The settings displayed belong to this card.
Pulse length in ms:
If you choose pulsed mode for at least one bit, this value determines the pulse length of the pulse.
A logical 1 leads to a physical 1 (closed contact).
A logical 1 leads to a physical 0 (open contact).
A physical 1 (closed contact/current) leads to a logical 1.
A physical 1 (closed contact/current) leads to a logical 0.
The output resides in the last state until a new write.
The output is pulsed for some time (see above) _|-|_
The next setting is only valid for a pulsed bit:
Writing 0 or 1 always leads to a pulse.
Writing a 1 leads to a pulse, writing a 0 resets the output bit
Use the tool PCLTestEx.exe to check the functionality of the IO card installation and configuration. If it works, proceed with step 4.
4. CONFIGURATION FOR DIGASYSTEM-APPLICATIONS
Main parameter "Fader_Active=TRUE" and "Number=0" (first IO card) in section "Edigas\IOCard"
EasyTrack / Multitrack / RecorderOCX
Use the parameters "RelaisCardCommand*" in section "EasyTrack\Settings", "Multitrack\Settings" and "PlayRec" for specific configuration of actions and bit values, and the parameter "RelaisCardNumber=0" (first IO card).
All settings for input/output bits are done inside the program - menu "Edit\Setup\IO card"
NewsPlayer1 and NewsPlayer4
Main parameter "Activate=TRUE" in News.ini or News4.ini, section "IOCARD".
NewsPlayer2, NewsPlayerX and NewsPresenter
Main parameter "IOCard=TRUE" in section "NewsPlayer2\IOCard" or "NewsPlayerX\IOCard".
All settings for input/output bits are done inside the program - menu "Settings\Parameter\IO card"
All settings are done inside "mixer.ini". For configuration please refer to the BCS-manual.
You can test the IO card settings without physical IO card, if you use the PCLsimulation.dll. Because this DLL can not be chosen inside the PCLComServer.exe, you have to change the parameter "PclComDll" inside Windows Registry "HKEY_LOCAL_MACHINE\SOFTWARE\David\PclComServer"
Back to top
Joined: 23 Dec 2005
Location: Washington DC Metro
Posted: Fri, 24. Feb 06, 18:41
Post subject: ICPDAS P16R16 on Windows 2000
ICPDAS P16R16 Installation on Windows 2000
The P16R16.dll version installed in the System32 directory during the card insatllation
be replaced by an older version to work correctly with Windows 2000. The version must be from March 1998. Attached to this post.
Director - Projects and Customer Services, North America
Older version of P16R16.dll needed for Windows 2000 Installs of ICPDAS P16R16 card
Back to top
Display posts from previous:
Select a forum
DAVID Systems News
Soft- und Hardware Forum Deutsch
Soft- and Hardware Forum English
ERFA Society Forum
Knowledge Base & FAQ
CartPlayer4 and CartWall Manager (discontinued product)
Database Manager 3.x and 4.x
DigaCut (discontinued product)
DigaIngester Pro (SD/HD)
DigaPlayerAV (discontinued product)
DigaPlayerAVControl (discontinued product)
DigaCon (discontinued product)
DigaSystem related hardware
DigaClipPlayer / DigaCut ST / DigaCut MT / DigaCutRenderService
DigaReplicator / ReplicatorClient
DigaSystem Audio Formatting
DigaTrans / DigaMailbox (discontinued product)
DigaTransIP / DigaMailboxIP
DigErase / DigAlign(V) / WebAlign
Edigas (Edit Station) (discontinued product)
MultiCoder / MultiCoderCentral
MultiPlayer / MultiPlayer 2 / MultiPlayer 3
MultiRec / MultiRec 2 / MultiRec 3
Multitrack Editor / EasyTrack 3
Multitrack Editor / EasyTrack / SingleTrack 4
Multitrack Editor / EasyTrack / SingleTrack 5
NewsPlayerX (discontinued product)
NewsSchedulerX (discontinued product)
Station Automation Framework (SAF)
post new topics in this forum
reply to topics in this forum
edit your posts in this forum
delete your posts in this forum
vote in polls in this forum
attach files in this forum
download files in this forum
DAVID Systems GmbH
| Forum Powered by