DAVID Systems

Portal  FAQ  Search  Usergroups  Register  Profile


Site Menu
 News (Home)
 Community Forum
 Knowledge Base & FAQ
 Product Lifecycle
 Software Download
 Desktop Searching

My DigaSystem
 TestTrack Login
 Contact Support
 Hardware return

Module Database
 All Parameters
Search Parameters

Log in
Username:

Password:

Remember Password 



I forgot my password

Don't have an account yet?
Join Us Now!

DAVID Systems - Customer Service Portal Forum Index -> General ->
How to configure IO Card in DigaSystem?

Post new topic   Reply to topic    Printer-friendly view
View previous topic :: View next topic  
Author Message
Anonymous
Guest





PostPosted: Sun, 25. Dec 05, 00:54    Post subject: How to configure IO Card in DigaSystem? Reply with quote

Question: How can I configure the support for IO cards in DigaSystem ?

Answer:
The following applications support IO-cards:
- Edit-Station
- EasyTrack
- Multitrack
- RecorderOCX (for DBM, NewsScheduler, NewsSchedulerX, CartWallManager)
- MultiCoder
- NewsPlayer1
- NewsPlayer2
- NewsPlayer4
- NewsPlayerX
- NewsPresenter
- CartPlayer4
- DigaROC

Here is a guide to installation and configuration.

1. WHICH FILES ARE NEEDED ?

- PCLComSrv.exe (PCL COM Server)
- PclDrv.dll (PCL API for the DigaSystem applications)
- Specific IO card DLL (see below)

These DLLs are needed for the different IO cards:
PclAdv725.dll (DLL for Advantech PCL-725 ISA card - 8 Bit)
PclAdv1760.dll (DLL for Advantech PCI-1760 PCI card - 8 Bit)
PclPiso725.dll (DLL for ICP DAS PISO-725 PCI card - 8 Bit)
PclIcpP8R8.dll (DLL for ICP DAS P8R8 (PCI-725) PCI card - 8 Bit)
PclIcpP16R16.dll (DLL for ICP DAS P16R16 PCI card - 16 Bit)
PclDvd725.dll (DLL for ISA cards similar to Advantech PCL-725 with DAVID device driver - 8 Bit)
PclSimulation.dll (DLL that implements an IO card simulation for testing without physical IO card)

2. INSTALLATION
Copy all DLLs and PclComServer.exe to \Winnt\System32
Doubleclick PclComServer.exe
Setup your configuration (see below)
Click OK to save your settings and register the server

3. CONFIGURATION OF PCLCOMSERVER

Number of cards in the system:
How many IO cards are in the PC?, multiple cards must be identical models.

Type of card:
Choose the type of board(s) you have installed.

Selected Card:
The settings displayed belong to this card.

Pulse length in ms:
If you choose pulsed mode for at least one bit, this value determines the pulse length of the pulse.

Output:
Active High:
A logical 1 leads to a physical 1 (closed contact).
Active Low:
A logical 1 leads to a physical 0 (open contact).

Input:
Active High:
A physical 1 (closed contact/current) leads to a logical 1.
Active Low:
A physical 1 (closed contact/current) leads to a logical 0.

Output Mode:
Static:
The output resides in the last state until a new write.
Pulsed:
The output is pulsed for some time (see above) _|-|_

The next setting is only valid for a pulsed bit:

Output Reset:
Set Only:
Writing 0 or 1 always leads to a pulse.
0 resets:
Writing a 1 leads to a pulse, writing a 0 resets the output bit

Tip:
Use the tool PCLTestEx.exe to check the functionality of the IO card installation and configuration. If it works, proceed with step 4.

4. CONFIGURATION FOR DIGASYSTEM-APPLICATIONS

Edit-Station
Main parameter "Fader_Active=TRUE" and "Number=0" (first IO card) in section "Edigas\IOCard"

EasyTrack / Multitrack / RecorderOCX
Use the parameters "RelaisCardCommand*" in section "EasyTrack\Settings", "Multitrack\Settings" and "PlayRec" for specific configuration of actions and bit values, and the parameter "RelaisCardNumber=0" (first IO card).

MultiCoder
All settings for input/output bits are done inside the program - menu "Edit\Setup\IO card"

NewsPlayer1 and NewsPlayer4
Main parameter "Activate=TRUE" in News.ini or News4.ini, section "IOCARD".

NewsPlayer2, NewsPlayerX and NewsPresenter
Main parameter "IOCard=TRUE" in section "NewsPlayer2\IOCard" or "NewsPlayerX\IOCard".

CartPlayer4
All settings for input/output bits are done inside the program - menu "Settings\Parameter\IO card"

DigaROC
All settings are done inside "mixer.ini". For configuration please refer to the BCS-manual.

Tip:
You can test the IO card settings without physical IO card, if you use the PCLsimulation.dll. Because this DLL can not be chosen inside the PCLComServer.exe, you have to change the parameter "PclComDll" inside Windows Registry "HKEY_LOCAL_MACHINE\SOFTWARE\David\PclComServer"
Back to top
Paul Weiland
DAVID Systems
DAVID Systems


Joined: 23 Dec 2005
Posts: 1
Location: Washington DC Metro

PostPosted: Fri, 24. Feb 06, 18:41    Post subject: ICPDAS P16R16 on Windows 2000 Reply with quote

ICPDAS P16R16 Installation on Windows 2000

The P16R16.dll version installed in the System32 directory during the card insatllation MUST be replaced by an older version to work correctly with Windows 2000. The version must be from March 1998. Attached to this post.

Paul Weiland
Director - Projects and Customer Services, North America



P16r16.zip
 Description:
Older version of P16R16.dll needed for Windows 2000 Installs of ICPDAS P16R16 card

Download
 Filename:  P16r16.zip
 Filesize:  15.44 KB
 Downloaded:  1234 Time(s)

Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    Printer-friendly view Page 1 of 1




Jump to:  


Forum Permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum